-

15 min read

DDP vs DAP: Who Pays Duty and What It Means for the Customs Entry

DDP vs DAP decides who clears the goods and pays the duty. See who acts as importer of record under each term and how the term changes the value you declare.

Last updated:


A DDP invoice tells you the seller agreed to pay the duty. That agreement is between the buyer and the seller. CBP does not read the sales contract. It collects duty from the importer of record named on the entry and checks the value declared on it.

That gap is the real problem with DDP vs DAP for a broker. The Incoterm changes who clears the goods and whose name goes on the entry. It also changes which costs sit inside the invoice price. A DDP total often folds freight and duty into one number, and declaring that number can overstate the value.

This article explains what DDP and DAP mean under Incoterms 2020 and who acts as importer of record under each.

TL;DR

  • DAP and DDP both make the seller carry the goods to a named place in the US, and risk passes to the buyer there under both terms.

  • Under DAP, the buyer clears the goods and pays the duty. Under DDP, the seller does both, and it is the only Incoterm where the seller pays tariffs.

  • The importer of record owes the duty to CBP, whatever the sales contract says. A foreign seller acting as IOR needs a resident agent and a bond.

  • Freight, insurance, and duty come out of the customs value only when they are identified separately. A DDP invoice with one total price can overstate the entered value.

  • Before filing, brokers need the Incoterm, a cost breakdown, accurate IOR details, a direct power of attorney, and values that agree across the invoice, packing list, and bill of lading.

DDP vs DAP under Incoterms 2020

Before you look at the entry, it helps to see what each term asks of the seller and the buyer. The DDP vs DAP difference is set by the Incoterms 2020 rules, which the International Chamber of Commerce (ICC) publishes.

DAP (Delivered at Place) and DDP (Delivered Duty Paid) are both delivered terms. Under each one, the seller arranges and pays for transport to a named place of destination. For your entries, that named place is in the US. The seller also completes export clearance in the origin country under both terms.

Risk passes at the same point under both terms. The seller carries the risk of loss or damage until the goods reach the named place, ready for unloading. After that, the risk sits with the buyer. Unloading is also the buyer’s job under both terms, unless the transport contract includes it.

The real difference lies in import clearance. Under DAP, the buyer handles import clearance and pays for it, so the buyer pays the duty and taxes. Under DDP, the seller handles import clearance and pays all duties and taxes in the destination country. The ICC’s 2025 guidance on tariff risk states that DDP is the only Incoterms rule where the seller pays tariffs.

This places DDP at the opposite end from Ex Works (EXW), where the buyer clears the goods for both export and import. Here is the DAP vs DDP Incoterms split at a glance:


DAP

DDP

Transport to the named place

Seller

Seller

Export clearance

Seller

Seller

Import clearance

Buyer

Seller

Import duty and taxes

Buyer

Seller

Risk passes to the buyer

At the named place

At the named place

Unloading at the named place

Buyer

Buyer

The ICC also notes that import clearance can be hard for a foreign seller to complete. Some countries require the local buyer to clear the goods, and in those cases DAP is the better fit. For a US entry, this question of who clears the goods decides whose name and liability sit behind the entry.

DDP or DAP: how to choose

The choice between DDP or DAP comes down to who can clear the goods and who should carry the tariff cost. DAP fits a foreign seller that cannot clear goods in the US or wants to avoid tariff risk, since the buyer handles import clearance and pays the duty. The ICC gives this as an example in its guidance on tariffs.

DDP fits a seller that is ready to take on every import duty and formality in the US. For a US entry, that seller also has to meet the importer of record rules covered in the next section.

Who is the importer of record under DDP and DAP

Once the Incoterm decides who clears the goods, the next question is whose name goes on the entry. That party is the importer of record (IOR), and the duty liability follows that name.

US law limits who can act as IOR. Under 19 U.S.C. 1484, the IOR must be the owner or purchaser of the goods, or a licensed customs broker they designate.

Under DAP, the buyer handles import clearance, so the US buyer normally acts as IOR. Under DDP, the seller must clear the goods. So the seller acts as IOR, or designates a licensed broker to act for it. The IOR number is the one you report on the entry summary.

When a foreign company acts as IOR, CBP treats it as a nonresident importer. Under CBP regulations, a corporation formed outside the US needs two things before it can enter goods:

  • An agent in the port’s state who can accept legal papers for it

  • A bond with a resident corporate surety, to cover any added duties found later

If either is missing, a DDP entry for that seller cannot move forward.

The IOR owes the duty to CBP, whatever the sales contract says. CBP regulations treat duty as a personal debt from the importer to the United States. Paying a broker does not clear that debt if the broker fails to pay CBP. The ICC also states that Incoterms do not change customs procedures. So if a US buyer files as IOR on a DDP sale, the buyer owes CBP the duty, even though the seller agreed to pay it.

Brokers already treat the IOR as the party that answers to CBP. During our demo calls, one broker said this to an importer that supplied its own HTS code: “It’s your call, right? I mean, you’re the one who’s going to be the audit, right?”

The IOR’s identity record now faces stricter checks too. In an August 2026 notice, CBP said it would void IOR numbers with inaccurate Form 5106 data from 18 September 2026. A voided number cannot be used to enter goods. The notice sets these rules for every IOR record:

  • The physical address must be the IOR’s own location, not a third party such as a freight forwarder

  • The email and phone number must belong to the IOR

  • The broker’s power of attorney must be signed directly with the IOR, not through a freight forwarder

The notice also says brokers must not transmit IOR data they have not verified. For a foreign seller on DDP terms, that check has to happen before the first entry is filed.

How the Incoterm changes the value on the entry

With the IOR settled, the next question is the value you declare. US transaction value starts from the price actually paid or payable. Under CBP regulations and the valuation statute, some costs can be left out of that price, but only under a condition.

Cost in the price

Left out of transaction value?

Condition

Source

International freight (from the country of export to the US)

Yes

Incident to the international shipment, with documents that show the amount

19 U.S.C. 1401a(b)(4)(A); 19 CFR 152.102(f)

Foreign inland freight (from the factory to the port of export)

Only in some cases

In a sale other than ex-factory, the goods must ship on a through bill of lading to the US

19 CFR 152.103(a)(5)

Insurance to the US

Yes

Incident to the international shipment

19 U.S.C. 1401a(b)(4)(A); 19 CFR 152.102(f)

US transport after arrival

Yes

Identified separately

19 U.S.C. 1401a(b)(3)(A)(ii); 19 CFR 152.103(i)

Customs duties and federal taxes

Yes

Identified separately

19 U.S.C. 1401a(b)(3)(B); 19 CFR 152.103(i)

Here is what that means for each term:

  • DDP: The buyer pays a higher price that covers transport and customs costs, including tariffs. A DDP invoice with one total shows none of these costs separately. If you declare that total, the entered value includes the freight and the duty itself.

  • DAP: The seller pays for carriage to the named place, so the price includes that carriage. The buyer pays the duty, so duty is not in the price. You still need the freight amount to leave it out of the value.

  • DAP to an inland named place: The price also covers US transport after arrival. That cost comes out only when it is identified separately.

For goods with an ad valorem rate, declaring a DDP total means paying duty on an amount that already contains duty.

The Incoterm also decides who carries a tariff change. The ICC states that DDP is the only rule where the seller pays tariffs. So if rates rise after a DDP price is agreed, the seller pays the higher duty, unless the contract allows a price change.

In each case, the entered value depends on cost lines that may not sit on the invoice.

What brokers need before filing a DDP or DAP entry

The last three sections each point back to the documents. Before a DDP or DAP entry is built, these are the items to confirm.

CBP’s starting point is the commercial invoice. CBP regulations require the invoice to list all charges on the goods by name and amount, including freight and insurance. A bond must also be in place before CBP releases the goods.

What to check

What to look for

Why it matters

Incoterm and named place

Stated on the commercial invoice

Decides who acts as IOR and which costs sit inside the price

Cost breakdown

Each cost inside a DDP total listed as its own line with an amount

Only costs identified separately come out of transaction value

IOR details

Form 5106 data uses the IOR’s own address, email, and phone

CBP voids IOR numbers with inaccurate data from 18 September 2026

Power of attorney

Signed directly with the IOR, not through a freight forwarder

CBP’s August 2026 notice requires a direct POA

Bond

Single entry or continuous bond in place, with a resident surety for a foreign IOR

CBP will not release goods without a bond

Matching values

Value and quantities agree across the invoice, packing list, and bill of lading

The bill of lading supports any freight you leave out of the value

Most of these items come from outside the invoice. During our demo calls, a Laredo broker described the same gap: “We find out the classification, the SCAC code for the carrier, which is not included on the invoice. It’s information that we have to add separately.”

The last row is where DDP entries often stall. A DDP total that does not match the other documents has to be traced back to its parts before the value can be declared. A three-way match across the invoice, packing list, and bill of lading shows that gap before the entry is filed.

Handling DDP and DAP entries through document automation

The checklist in the last section is mostly document work. It happens before an entry writer opens the filing software. The Incoterm and cost lines have to be read off the invoice. The values have to agree across the invoice, packing list, and bill of lading. Any missing breakdown or IOR detail has to come back from the shipper or importer.

Document automation handles this upstream work. It reads each document as it arrives and checks the figures against each other. Gaps get flagged at intake, not after a CBP query.

Docxster is a document automation platform built for this step. It sits between the documents your brokerage receives and the filing software you already use. It does not replace that software or the licensed broker’s judgment. Here is how Docxster for customs brokerage handles DDP and DAP documents.

1. Reading the Incoterm and cost lines

A DDP or DAP entry starts with two facts from the invoice. The first is the Incoterm and named place. The second is whether the costs inside the price are listed separately.

Docxster’s intelligent document processing reads invoices without a stored template for each shipper. It finds fields by their meaning, not their position on the page. So a new shipper’s layout does not stop the read. It pulls the Incoterm, the price, and each charge line, such as freight or insurance.

Every extracted field carries a confidence score. Fields with a low score go to a reviewer. This matters for scanned or photographed invoices, where a charge line may be hard to read. For a DDP invoice, you see at intake whether the costs are itemized or folded into one total.

2. Checking values across documents

A DDP total only holds if it agrees with the other documents. Docxster’s validations compare value, weight, piece count, and consignee across the invoice, packing list, and bill of lading.

Reviewers see only the fields that disagree. A failed check shows the rule and both documents side by side. So a freight amount on the bill of lading that does not match the invoice gets flagged before it reaches the entered value.

Validation rules can be edited at any time, and the next document runs on the updated logic. A brokerage can add its own checks for DDP entries, such as a rule for invoices with no itemized freight.

3. Requesting missing breakdowns or IOR details

When a DDP total has no cost breakdown, someone has to ask for it. The same applies to IOR details that do not meet CBP’s Form 5106 rules.

Docxster Forms and Chat give each request a public link. The shipper or importer does not need a Docxster login. They can enter the figure in a form, or type it in plain language and attach a document in chat. Each submission starts a Docxster workflow, and uploaded files go straight into extraction. Email works as a fallback for parties who prefer it.

For DDP and DAP entries, you can use these links to collect:

  • The freight, insurance, and duty amounts behind a DDP total

  • The IOR’s own physical address, email, and phone number

  • A copy of the power of attorney signed directly with the IOR

Docxster collects what the IOR provides. It does not verify that data with CBP, so the broker still owns that check under the August 2026 notice.

4. Review before filing

Docxster’s workflow builder connects intake, extraction, and validation into one flow. Entries with failed checks or low-confidence fields go to a reviewer in the Action Center. Clean entries move ahead. Reviewers can override or reject a field in one click, and every action is logged in an audit trail.

The validated data then goes to the filing software your team already uses. Your inbox and login stay the same. This is also why a customs tool has to work across formats from day one.

The decisions on the entry stay with the licensed broker. Docxster prepares the data for those decisions. The broker still decides who acts as IOR and which costs come out of the value.

How document automation prepares DDP and DAP entries before you file

A DDP or DAP term tells you who agreed to pay the duty. It does not tell CBP who owes it. That answer comes from the entry, where the IOR’s name sits and where the declared value is set.

So the Incoterm is only the starting point. Under DAP, the buyer clears the goods, and you still need the freight amount to keep it out of the value. Under DDP, the seller clears the goods. A foreign seller then needs a resident agent, a bond, and accurate Form 5106 data. A single DDP total also has to be broken into its cost lines before the value holds. Each of these items sits in a document or a detail that the invoice alone does not give you.

Docxster handles that document work before the entry reaches your filing software. It reads the Incoterm and cost lines from each invoice and checks the values against the packing list and bill of lading. It also collects missing breakdowns or IOR details through a form or chat link. The IOR decision and the final value stay with you.

Book a demo to see it run on your own DDP and DAP entries


FAQs

1. What is the difference between DDP and DAP?

Under DAP, the buyer clears the goods and pays the import duty. Under DDP, the seller does both, and risk passes at the named place under both terms.

2. Is DDP or DAP better for the seller?

DAP keeps the seller out of US import clearance and tariff costs. DDP suits a seller that can act as IOR, with a resident agent and a bond, and accepts the duty cost.

3. Is freight included in the customs value of a DDP shipment?

International freight is left out of transaction value only when it is identified separately from the price. If the invoice shows one total, the freight stays in the value.

4. Who is liable if duty on a DDP shipment is underpaid?

The importer of record is liable to CBP. If the buyer filed as IOR, the buyer owes the difference, even though the seller agreed to pay.

5. What should a broker do with a DDP invoice that shows one total price?

Ask the seller for a breakdown of freight, insurance, and duty. Then check those amounts against the bill of lading before you declare the value.

On This Page

No headings found

On This Page

No headings found

Turn documents into decisions.

See how Docxster gets you from inbox to insight in minutes, not days. Bring your toughest workflow — we'll show you what it looks like solved.